实验台-PT500多级齿轮箱故障模拟测试台

产品特点：

PT500多级齿轮箱故障模拟测试台采用ABB1.5千瓦三相异步电机由联轴器直接驱动，配合变频器来调节转速，可调磁粉负载给测试台增加测试负载。可以选择不同故障类型的轴承，在不同转速下，验证轴承缺陷频率特征，还可进行故障齿轮测试、油液循环系统、转子动平衡试验模块、启停机试验、转轴摩擦试验，在安全可控的环境中单独或与各种缺陷组合搭配实验。作为研究旋转机械故障特征的创新实验平台，满足教学模拟及科研用户的广泛需求。  

The P500 Multi-stage Gearbox Fault Simulator adopts ABB 1.5 kW three-phase asynchronous motor driven directly by  coupling, with frequency converter to adjust the speed, and adjustable magnetic powder load to increase the test  load on the test bench. Bearings with different types of faults can be selected to verify the frequency characteristics  of bearing defects at different speeds. Fault gear testing, oil circulation system testing, rotor dynamic balance testing  module, start stop testing, and shaft friction testing can also be conducted separately or in combination with various  defects in a safe and controllable environment. As an innovative experimental platform for studying the fault characteristics of rotating machinery, it fully meets the extensive needs of teaching simulation and scientific research users

测试台组成：

PT500多级齿轮箱故障模拟测试台主要由三相异步电机、变频器、双支撑轴承、动平衡转子盘、油液循环系统、转轴、两级传动齿轮组、行星齿轮箱、磁粉负载转矩调节机构、减震基础底座、可调磁粉负载制动器组件等组成。

The test bench is mainly composed of three-phase asynchronous motors, frequency converters, double support bearings, dynamic balancing rotor discs, oil circulation systems, shafts, two-stage transmission gear sets, planetary gearboxes, magnetic powder load torque adjustment mechanisms, shock-absorbing foundation bases, adjustable magnetic powder load brake components, etc

测试台主要功能：

l故障轴承模拟：轴承内圈故障、轴承外圈故障、轴承滚动体故障、轴承保持架故障、轴承综合故障。

l齿轮故障模拟：缺齿、断齿、磨损、裂纹。

l行星齿轮故障模拟：缺齿、断齿、磨损、裂纹。

l油液循环润滑模拟、转子动平衡。

l常见机械故障：机械松动、摩擦、不对中等试验。

l不同转速下的轴承故障频率识别。

l测试台启停机测试。

l测试台在不同转矩负载下的振动特征表现研究。

测试台基本技术参数：