产品详情
进口耐用混流风机(进口)
进口耐用混流风机Product Description:
The utility model comprises a shell, a motor is arranged inside the shell, an impeller is connected on the output end of the motor, an air outlet is arranged at one end of the shell, an air inlet is arranged at the other end, an installation groove is arranged on the outer wall of the shell at the air inlet, the installation groove is connected with the interior of the shell, a dust-proof component is arranged inside the installation groove, the dust-proof component includes a shell and a dust-proof net which fit with the installation groove, and a sliding groove which runs through the left and right is arranged inside the shell, Both ends of the sliding block are provided with sliding connecting grooves, and the sliding connecting blocks extend out of the sliding block. Beneficial effect: when dust adhesion is caused by long-term use of the dust net, the dust net can be removed from the inside of the shell through the shell by releasing the limit lock of the locking block by the locking groove. The operation is relatively convenient and simple, so that the dust adhered to the dust net can be easily cleaned and the dust-proof effect of the dust net can always be guaranteed.
进口耐用混流风机characteristic:
The existing mixed flow fan comprises a shell, a motor, a guide impeller, blades and a support. The shell is arranged on the support, the left and right ends of the shell are respectively provided with air inlets and air outlets, the motor is installed inside the shell, the input end of the motor is provided with a power line, the guide impeller is arranged on the output end of the motor, and the blades are arranged on the guide impeller. When using the existing mixed flow fan, first move it to the designated area, align the air inlet with the designated area, and then energize the motor to drive the guide impeller and blade to rotate, so as to extract the air in the area
进口耐用混流风机Principle:
Since the installation groove connected with the inside of the shell is set at the air inlet on the outer wall of the shell, when installing the dust-proof component into the installation groove, it is only necessary to insert the dust-proof component into the installation groove, so that the shell is embedded into the installation groove and fits with the installation groove to form a whole. When the outer shell is embedded into the installation groove, the locking blocks on both sides of the shell will align with the opening groove and snap in until they slide to the connection between the opening groove and the locking groove, At this time, the sliding block can be pushed to make the locking block slide and snap into the locking groove. By locking the limit of the locking block through the locking groove, the shell can be fixed in the installation groove, so as to fix the dust screen inside the shell at the air inlet position. When the mixed flow fan works, the dust will be blocked by the dust screen 8 and cannot enter the shell through the air inlet, so as to ensure the use effect of the fan, When the dust screen adheres due to long-term use, just push the slider to make the locking block slide back to the inside of the opening groove, and then the limit locking of the locking groove to the locking block can be easily released, so that the locking block can be detached through the opening groove, so as to facilitate the removal of the dust screen from the inside of the shell through the shell. The operation is relatively convenient and simple, so that the dust adhered to the dust screen can be easily cleaned, Always ensure the dust-proof effect of the dust screen.
(仅供参考)