oTm-942-HDMI分配器HDMI1.4 ×2矩阵3D的HDMI 1.4a视频格式4K x 2K分辨率

HDMI分配器HDMI1.4 ×2矩阵3D的HDMI 1.4a视频格式4K x 2K分辨率1080P

HDMI splitter HDMI1.4 4x2 Matrix 3D HDMI 1.4a video format 4K x 2K 1080P 

 

Introduction:

HDMI Matrix 4 x 2 is a 4-by-2 DVI/HDMI matrix with 4Kx2K. It allows any source (Blue-ray player, HD DVD player, salite receiver, game system, etc.) to be shown on the any of the two displays simultaneously, no matter the source is HDCP or not. Extra infrared receiver port is supplied for remote control. It offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments, etc.

Features:

·Support display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz

·3D HDMI 1.4a video format support.

·3D video support including Frame packing for all 3D formats up to a 297MHz TMDS clock.

·Supports deep color up to 48-bit per pixel.

·HDCP 1.4 support (input), HDCP v1.4a protocol compliant (output).

·Supports the reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR

·Full colorimetry including sYCC601,Adobe RGB,Adobe YCC601,xvYCC extended gamut color

·Operates for TMDS clock frequencies up to 300MHz

Specification:

·Frequency Bandwidth: 2.97Gbps

·Input Ports: 4 x HDMI Female input ports

·Output Ports: 2 x HDMI Female output ports

·Power Supply: DC 5V 1A

·ESD Protection Human Body Model: ± 8kV (air-gap discharge), ± 4kV (contact discharge)

·Dimensions (mm): 85(W) X 192 (D) X 26 (H)

·Weight(g): 450

·Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F

·Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F

·Relative Humidity: 20 ~ 90% RH (Non-condensing)

·Power Consumption (Max): 5W

Package Included:

·1xHDMI Matrix  

·1x5V1A DC Power Supply adapter  ?US?

·1xOperation Manual

·1xRemote control

Operation controls and functions

Front Panel 

1.      ON/OFF: Power on/off switch.

2.      POWER LED: This red LED illuminate when the device is connected with power supply.

3.      INPUT LED: These red LED illuminate when the output select to the corresponding input.

4.      EDID LED: These red LED illuminate when the EDID select to corresponding items.

           1080P LED illuminate indicate that force to output 1080P video.

           3D LED illuminate indicate that force to output 3D video.

           5.1CH LED illuminate indicate that force to output 5.1CH audio.

           7.1CH LED illuminate indicate that force to output 7.1CH audio

           5.1CH and 7.1CH LED get dark indicate that force to output 2.0CH audio.

           All the EDID LED get dark indicate that in AUTO mode.

5.      IR IN: Remote control signal receive.

6.      OUTPUT A: Press this button to select the input source to HDMI OUT A.

7.      OUTPUT B: Press this button to select the input source to HDMI OUT B.

8.      AUTO: Press this button to into AUTO mode. When in AUTO mode, all the EDID LED will get dark.

Rear Panel

1.    HDMI OUTPUT: These slots are where you connect the HDTV or monitor with HDMI cable.

2.    HDMI INPUT: These slots are where you connect the HDMI source output from DVD, PS3.

3.   DC IN: Plug the 5V DC power supply into the unit and connect the adapter to AC wall outlet.